My cart 0 items - 0
  • Empty
Check Out

Total Price : 0원

예약 Extra 300 3D 1.3m PNP

Extra 300 1.3m PNP

Introduction

The full-scale Extra 300 delivers incredible aerobatic performance that offers virtually unlimited potential, which is why it’s been a game changer for nearly three decades now. Variants have been flown to first place finishes in a long list of competitions, including at a number of world championships. The E-flite® Extra 300 3D 1.3m model delivers unbelievable aerobatic and 3D capabilities while also being easy to fly when equipped with exclusive AS3X® and SAFE® Select technologies (BNF® Basic version only).

Key Features

  • A scale replica of the world-renowned aerobatic champion
  • 3S and 4S compatible 60A ESC and outrunner motor with wooden propeller
  • Fast and precise factory-installed digital, metal-geared servos with ball-link equipped linkages
  • Scale outline and details including a cockpit with instrument panel and pilot figure
  • Oversized control surfaces for maximum 3D aerobatic capability
  • Rugged landing gear with scale covers and wheel pants
  • Two-piece plug-in wings with carbon fiber wing tube
  • Magnetically-secured hatches provide convenient access to battery and electronics
  • Lightweight yet durable, composite-reinforced construction with EPO material
  • Factory-finished with a vivid paint scheme and bold graphics
Needed to Complete
  • Full-range, 4+ channel transmitter and receiver
  • 2200–3200mAh 3S or 4S 11.1–14.8V LiPo with EC3™ or IC3™ Connector
  • Compatible LiPo charger
What's in the Box?
  • (1) E-flite Extra 300 1.3m PNP
    • (1) 60A ESC
    • (1) Brushless Outrunner Motor
    • (4) 23-gram Digital, Metal-Geared Servo
  • (1) Product Manual

Overview

The E-flite® Extra 300 3D 1.3m scale model offers nearly unlimited aerobatic and 3D performance potential–even beyond that of the full-scale design. Its fully-molded EPO airframe is composite reinforced for an outstanding blend of rigidity and durability while also being as lightweight as possible. Fast and precise factory-installed digital, metal-geared servos and ball-link equipped linkages drive the oversized control surfaces to deliver incredible 3D and precision flight capabilities. The 3S and 4S compatible power system features a 60-amp ESC that pairs perfectly with the outrunner motor equipped with a lightweight wooden propeller to deliver outstanding thrust and vertical performance, plus extremely crisp throttle response. So whether you fly it mild to hone your sport or precision aerobatic flight skills, or fly it wild to perform the most aggressive 3D maneuvers, the Extra 300 3D 1.3m will offer unexpected levels of capability and performance you’ll enjoy flight after flight.

Video Overview


Plug-N-Play®

This Plug-N-Play model comes with the motor, ESC and servos installed. All you need to do is complete some final assembly, install a receiver, charge a battery and fly!

Plug-N-Play®

Abundant Power

The high-power brushless power system features a 60-amp ESC and an outrunner motor equipped with a lightweight wooden propeller that combine with a 3S or 4S 2200-3200mAh LiPo battery to deliver an abundance of beyond-scale power resulting in unlimited vertical performance.

Abundant Power

Authentic Appearance

In addition to the scale outline, this replica is also appointed with a clear canopy and a detailed cockpit that features an instrument panel and a painted pilot figure. Plus the durable landing gear is equipped with covers and wheel pants that add to the great looks and authentic scale appearance.

Authentic Appearance

Lightweight Precision

Construction with lightweight yet durable, composite-reinforced EPO material ensures the best possible flight performance while the factory-installed digital, metal-geared servos and ball-link equipped linkages deliver precise control of the oversized control surfaces whether you're performing sport, precision or aggressive 3D aerobatic maneuvers.

Lightweight Precision

Extra 300 1.3m PNP

E-Flight 비행기 퀵가이드.

우선 저희 제품 이용을 해주셔서 감사의 말씀 드립니다.

이 퀵 가이드는 숙련자용이 아닌 기본적으로 처음 입문 또는 저희 제품을 처음 이용하시는 분들께

도움이 되고 자 제작된 매뉴얼입니다. 제품마다 차이가 있음을 미리 안내 드리며 용어는 공통으로 사용되는

경우가 많으니 참고 하시면 되겠습니다.

우선 저희 호라이즌 제품은 RTF/BNF/PNP/ARF 제품군으로 이루어 져 있습니다. 전용 자이로 수신기 사용시에 조종기는 Spektrum 조종기만을 사용 하셔야 비행이 가능합니다. 타사 조종기와 호환은 되지 않으며 자이로 부분 또는 수신기부분을 변경하셔야 사용이 가능합니다. 변경이 불가한 제품군도 있습니다. ( UMX /체구가 작은드론 은 변경불가 합니다.)

1. 우선 저희쪽에서 조종기 및 비행기 셋팅 및 테스트는 완료 되어 발송됩니다.

2. 조종기를 우선 보시면 많은 은색의 스위치가 있는경우도 있습니다. 모든 스위치를 0으로 마추어 주세요. (없는경우도 있습니다.)

3. 그후 조종기 전원을 켜주신후 스로틀 (스프링 이 없는 조종스틱을 아래로 내려주세요)

4. 드론의 전원 컨넥터를 연결 합니다. 그후 평평 한 곳에 잠시 4~5 초 놔둡니다.

(이부분이 자이로 수평값을 인식 하는 시기 입니다. 이때 절대 움직이지 말아 주셔야 하며 달리는 차량 안에서 등 에서는 불가 합니다. 또한 기체의 LED 가 빠르게 깜빡일경우에는 잘못된것이니 용산알씨 기술지원 센터로 연락 부탁드립니다. ※본 매뉴얼 뒷면에 해결 방법 있습니다.)

5. 그후 기체의 LED가 깜빡이지 않고 들어와 있으면 정상 입니다.

6. 즐거운 비행 되세요!

조종기의 사용법

조종기의 스위치가 있는경우도 있고 없는경우도 있습니다. 있는경우에는 스위치 옆 라벨에 알파벳으로 되어있습니다. B스위치는 사용하는 스위치 입니다.

B스위치 기본적으로는 0 1 2 이렇게 되어있습니다. 이부분에서 0번이 노말 비행 상태입니다. 초급자 연습시에 사용 합니다. 1번은 중급 비행시 사용 합니다. 2번은 고속 고급자 비행을 하실때 사용 하게 됩니다. 1/2 번 스위치가 켜지게 되면 기체는 배면 비행도 가능하게 됩니다.. (주의)

그외 조종 스틱의 좌측 상하 / 좌우 or 우측 상하 / 좌우 의 주변에는 버튼 또는 레바가 있습니다.

이부분은 기체의 상하 좌우 회전에 있어 미세조종 입니다. 한쪽으로 흐르거나 하는 부분을 보정하는 버튼,레바 입니다. 흐르는 방향의 반대로 2~3클릭씩 옴겨주세요.

<바인딩방법>

기본적으로 바인딩은 기체와 조종기 연결이 끊어져 수신기의 LED가 빠르게 점멸 또는 LED가 켜지지 않는경우에 해주시는 것 입니다.

바인딩 방식은 2가지로 있습니다.

작은기체 (수신기가 통합으로서 없는경우)

1. 조종기는 전원이 꺼져있는 상태에서 기체 전원만 켭니다.

2. 수초후에 기체의 LED가 빠르게 점멸 합니다.

3. 기체와 약 50Cm 떨어져 있는 상태에서 조종기 죄측 상부에 누르는 버튼 Bind 라는 버튼을 누른상태로 전원을 인가 합니다.

4. 조종기에서 바인딩! ……. DXM**** ……….. 바인딩 컴플릿 이라는 메시지가 출력 됩니다.

그외 수신기가 있거나 자이로 통합 수신기 인경우

1. 조종기의 전원이 꺼져 있는 상태에서 수신기에 바인딩컨넥터라는 것을 꼽습니다.(고리 컨넥터)

2. 그후 기체의 전원을 인가 합니다. LED가 빠르게 점멸 합니다.

3. 기체와 약 50Cm 떨어져 있는 상태에서 조종기 죄측 상부에 누르는 버튼 Bind 라는 버튼을 누른상태로 전원을 인가 합니다.

4. 조종기에서 바인딩! ……. DXM**** ……….. 바인딩 컴플릿 이라는 메시지가 출력 됩니다.

Aileron: Dual servo control
Airfoil Shape: Fully Symmetrical
Approximate Assembly Time: 1-3 Hours
Approximate Flight Time: 4 minutes
CG (Center of Gravity): 3.5 - 4 in (90-100mm)
Completion Level: Plug-N-Play
Control Throw - High (Ailerons): 1.9 in (50mm)
Control Throw - High (Elevator): 2.4 in (60mm)
Control Throw - High (Rudder): 3.9 in (100mm)
Control Throw - Low (Ailerons): 1.5 in (38mm)
Control Throw - Low (Elevator): 1.8 in (45mm)
Control Throw - Low (Rudder): 2.7 in (70mm)
Expo (Ailerons): 15% Low, 30% High
Expo (Elevator): 15% Low, 30% High
Expo (Rudder): 15% Low, 30% High
Flying Weight: 53.3 - 59.8 oz (1510-1696 g)
Landing Gear: Fixed main LG with steerable tail wheel
Length: 49.6 in (1260mm)
Material: EPO
Minimum Required Radio: 4-channel
Minimum Speed Control: 60A included
Motor Size: 4250-910Kv Brushless
Propeller Size: 13x6E wooden
Recommended Motor Battery: 3-4S 2200 - 3200 mAhLiPo
Servos: Four 23g digital metal gear
Spinner Size: 2 in (53mm)
Stabilizer Tube Length: 15.7 in (400mm)
Stabilizer Tube OD: 0.24 in (6mm)
Transmitter Range: Full range
Trimscheme Colors: White, Gray, Dark Yellow, Black
Wing Area: 572 sq in (36.9 sq dm)
Wing Loading: 13.4-15.1 oz/sq in (40.9-46 g/sq dm)
Wing Tube Length: 23.6 in (600mm)
Wing Tube OD: 0.39 in (10mm)
Wingspan:
51.5 in (1308mm)


등록된 상품평이 없습니다.

배송안내
1. 구매 금액 합계가 100,000원 이상일 경우 무료배송이 적용되며, 100,000원 미만일 경우 배송비를 고객님께서 부담 하셔야 합니다.
2. 배송료 : 4,000원(제주,도서/산간지역은 추가 배송료가 적용됩니다.)
3. 오후 4시까지 입금확인이 되는 주문은 당일 발송해 드립니다.
    (단, 택배사 사정에 따라 하루정도 지연될 수 있습니다.)
4. 배송기간은 입금확인일로 부터 평일기준 1~2일 소요됩니다. (도서/산간지역은 배송이 지연 될수도 있습니다.)
5. 상품의 배송 진행상황은 대한통운택배에서 배송조회를 통하여 정확히 확인할 수 있습니다.
6. 상품을 구매당일날 받으시길 원하실 경우 퀵서비스로 받아보실 수 있습니다.(운임비는 착불입니다)
    (단, 도서산간,제주도,오지 일부지역은 배송비가 추가될 수 있으며, 기본배송비 이외의 추가금액은 착불입니다)
7. 묶음 배송은 같은 시간, 날짜와 동일 수취인, 주소지,연락처가 일치한 상품에 한하여 묶음 배송 됩니다.

파손 / AS / 교환
1. 상품 배송시 파손의 경우 새 상품으로 신속하게 재발송해 드립니다.
    파손된 상품은 새 상품 수령 후 반품할 상품을 택배기사에게 주시면 됩니다.
    (전액 배송비 RC마린에서 부담.)
2. 상품에 대한 파손 접수기간은 최초 물품 수령 후 3일 이내에만 가능합니다.
3. 상품을 반품하거나 환불시 꼭 대한통운택배를 이용하시기 바랍니다.
4. 상품 사용중 이상이 있거나, 고장이 발생시 RC마린 (☎ 052-277-9927)로 A/S 접수하시면,
    유상 및 무상 여부를 확인하여 신속하게 처리해 드립니다.
5. 초기 상품 불량/이상의 경우, 해당 제품의 A/S 가능하나, 추가손실(크리스탈 불량으로 인한 추락, 사고, 손실 등)은 책임지지 않습니다.
6. 송/수신기 관련 제품은 미약전파를 사용하여 전파혼신의 가능성이 있으므로 사용전 충분한 테스트를 거친후 사용하시기 바랍니다.
    무선조종중 일어나는 혼선 및 제품의 불량 등으로 인한 2차적인 피해에 관해서는 책임지지 않습니다.

7. 충전기 및 배터리 관련제품을 충전/방전/사용 시에는 화재(폭발)가 일어날수 있으므로 주의하여 사용하시기 바라며,
    그로인한 피해는 책임지지 않습니다.
반품 및 환불
1. 상품에 대한 반품은 주문번호, 주문자 성함으로 접수(☎ 052-277-9927)해주시면 택배회사 기사가 전화 후 방문하여드립니다.
2. 상품에 대한 반품시 배송비용은 두가지로 나누어집니다.
고객 변심일 경우 고객님 부담, 상품하자 및 불량일 경우 RC마린에서 전액 부담을 원칙으로 합니다.
(상품하자 및 불량시 배송은 꼭 대한통운택배 를 이용하여 보내시기 바랍니다. 타사 택배 이용시 수취거절될수 있습니다.)
3. 상품 반품에 대한 환불은 본사로 물품이 도착되면, 온라인계좌 입금 또는 신용카드결제 취소로 이루어 집니다.
4. 상품을 반품시 파손될 경우 그 손해는 상품 파손정도에 따라 고객님께서 부담하셔야 합니다.
5. 제품의 사용 흔적 및 장착 후 탈거 , 포장지 훼손, 등의 사유에는 반품/교환/환불이 불가 합니다.
6. 택배사는 대한통운택배를 이용하여 보내주시면 됩니다.
     대한통운택배 외 다른 택배사를 이용하실 경우 수취거부가 됩니다.

7. 반품 또는 교환 기간 안내 : 구입, 배송완료 후 8일 이내